A collection of posts often on colt E- and I-frame revolvers: pythons, model 357s, officer model specials, etc. Topics not limited to: action jobs, fixing Bubba-gone-wrong gunsmith mistakes, and revolver porn. And sometimes I'll wander off the reservation and type random nouns and verbs that have nothing to do with our sole purpose, because who the hell can really pay attention that long?

Tuesday, December 29, 2009

Zing

Are you saying the citizens of Berkeley are Communists, reminiscent of those on the dark side of the Iron Curtain?
There are probably more Communists in Berkeley than any other town in America, but I think of them more as lovers of Birkenstocks than Marx.

--- John Yoo on the constant protests by the vapid at Berkeley. Actually is a pretty funny guy: http://www.nytimes.com/2010/01/03/magazine/03fob-q4-t.html?partner=rss&emc=rss

#1 ranked chess player is 19

I've not followed chess in a long time, other than Fischer's japes and Kasparov's opera, so totally missed this the fact that the #1 ranked player is 19. Interesting (albeit old) interview here when he was 13: http://www.chessbase.com/newsdetail.asp?newsid=1614

Some (colt) porn



Recently had to sell a couple of colts, which is a good way to finally get some photos taken. Seems like filtered overcast light highlights blueing well.




















photobucket must die

I cannot believe these slimy scumbags.

Their brilliant moneymaking scheme: if you upload more than some threshold of byte then --- rather than block further uploads for some amount of time --- they turn off *all* your photos unless you pay extortion money ("go pro!") to get them to release them.

Further, while paying, each time you click some option they will silently tick a "please set up recurrent billing!" box to try to parasite away more funds.

I cannot wait until this collection of inbred suits gets wiped off the planet.

Monday, December 28, 2009

Yet more evidence that JFK knew how to party

Gives new meaning to "never get off the boat" (from TMZ):



The french and boundary issues

Innocently reading an economics blog  ("marginal revolution"  http://www.marginalrevolution.com/marginalrevolution/2009/12/assorted-links-23.html) one clicks on the second link down and gets:  http://www.hotdollfordog.com/


If you have a tough constitution and vile humor, watch the video.  They use "audacious" and "stability" in ways that one would never imagine.  Only $400EU!


Thursday, December 24, 2009

Good writeup: CA vs TX

Simple strategy: spend less, get more. http://www.city-journal.org/2009/19_4_california.html

Hat tip: MR.

Tuesday, December 22, 2009

emco v13 cutting 1/2" toolsteel to nothing in one pass

Could go faster, easily. I really love this model, the thing eats SS like aluminum:


 

The best takedown of any movie, ever.



This can't possibly work, but does: Some amateur guy put together a 70 minutes long(!) destruction on "phantom menace" a  movie I've never seen (and hope you never do either).  It's really really good.  Very concrete and self-contained so you need not ever (ever) get close to that which it hates on.  




Wednesday, December 16, 2009

rhetoric over reality: brit scientist fired over looking into the relative lethality of different drugs

Article here: http://www.boston.com/bostonglobe/ideas/articles/2009/12/13/you_cant_handle_the_truth/


The adviser, Dr. David Nutt, said in a lecture that alcohol is more hazardous than many outlawed substances, and that the United Kingdom might be making a mistake in throwing marijuana smokers in jail. His comments were published in a press release in October, and the next day he was dismissed. The buzz over his sacking has yet to subside: Nutt has become the talk of pubs and Parliament, as well as the subject of tabloid headlines like: “Drug advisor on wacky baccy?”
But behind Nutt’s words lay something perhaps more surprising, and harder to grapple with. His comments weren’t the idle musings of a reality-insulated professor in a policy job. They were based on a list - a scientifically compiled ranking of drugs, assembled by specialists in chemistry, health, and enforcement, published in a prestigious medical journal two years earlier.
The list, printed as a chart with the unassuming title “Mean Harm Scores for 20 Substances,” ranked a set of common drugs, both legal and illegal, in order of their harmfulness - how addictive they were, how physically damaging, and how much they threatened society. Many drug specialists now consider it one of the most objective sources available on the actual harmfulness of different substances.
That ranking showed, with numbers, what Nutt was fired for saying out loud: Overall, alcohol is far worse than many illegal drugs. So is tobacco. Smoking pot is less harmful than drinking, and LSD is less damaging yet.





He was swiftly booted from his government position. Home Secretary Alan Johnson said Nutt had crossed a line. He “cannot be both a government adviser and a campaigner against government policy,” Johnson told The Guardian newspaper.

"It was a funny, kind of petulant reaction,” Nutt told the Globe, “all about machismo and politics. We’re harder on drugs than you, we’re tougher.”




Sunday, December 6, 2009

Fly cutters rock!


OK, I know I am about 100 years late to this particular party, but I have to say that fly cutters are freaking awesome! I'd always heard about them but just throught "WTF do I need another tool for?" Turns out that was pretty stupid.

The phrase you need to remember is "poor man's surface grinder."

Once you figure out how to grind the tool correctly you'll have fun. I've been squaring up aluminum for hours for no particular reason.

Pixels beat letters, so let's get to it.

I recently picked up an emcomat 8.4 mill/lathe combination. Generally I have a low opinion of combination machines (fish nor fowl) but Emco has a wonderful reputation for high Austrian quality and this machine lived up to it. It's a pretty sturdy machine (400lb?) for its size, and like the other emco's I've used cuts way above its weight. As a nice touch, the previous owner hand cut 10 quick change tool holders:



We have a rough piece of aluminum that we start making a cut on:


Fixing a 3-jaw emco chuck



So, among the many things wrong w/ an Emco V13 engine lathe I picked up (not it's fault), the chuck had been sorely abused and required serious cranking to turn the key towards the end. This is a short post on fixing it.

I'd not seen something written up (though I'm sure there has been, many times). And it's definitely not rocket science. However, sometimes it's useful to realize something is not rocket science so you actually do it. In this case fixing the problem made a big difference, though it still remains to a slight degree.

Here's the chuck. V13's have a D1-4 mount:


Followers